Revenue rose but profit fell
Higher sales did not protect bottom-line earnings
Watch: Compare tonnes, price and costs
Home / Research / Gallantt Ispat Limited
Revenue rose but profit fell
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
Higher sales did not protect bottom-line earnings
Watch: Compare tonnes, price and costs
Financing, depreciation and tax matter
Watch: Reconcile earnings
Small cost changes can move earnings materially
Watch: Track unit cost
Steel melting throughput needs recovery
Watch: Track ramp-up
Gallantt Ispat Limited (NSE: GALLANTT) | Q2 FY27, quarter ended 30 September 2026 | Indian steel manufacturing | WATCH
The investment question: Gallantt's revenue rose even while steel output fell during planned shutdowns. The next two quarters will show whether new capacity, captive energy and raw-material integration can restore production and convert this spending into stronger cash earnings. The company is undertaking a large expansion programme, so execution and debt matter as much as the reported profit recovery. [S1][S2]
| Indicator | Q2 FY27 | Basis |
|---|---|---|
| Revenue | ₹1,145.89 crore | Company quarterly presentation |
| EBITDA (earnings before interest, tax, depreciation and amortisation) | ₹110.52 crore | Company presentation |
| EBITDA margin | 9.64% | Company presentation |
| Profit after tax | ₹60.51 crore | Company presentation |
| Profit margin | 5.28% | Company presentation |
| EBITDA per tonne | ₹6,149 | Company presentation |
| Steel billets produced | 180 thousand tonnes | Both plants combined |
| TMT bars sold | 164 thousand tonnes | Both plants combined |
| Net debt | ₹190.58 crore | Company presentation |
| Cumulative expansion spending | ₹652.54 crore | Against stated ₹3,000 crore programme |
What changed: Management reported 13% year-on-year revenue growth but an 18% year-on-year decline in EBITDA, while profit after tax fell 31%. Planned shutdowns and higher input costs squeezed operating earnings even though realised selling prices supported revenue. EBITDA was also down 45.7% sequentially, and profit after tax was down 51.1% sequentially. These are issuer-stated comparisons; they should not be mistaken for growth in underlying steel volumes. [S1][S2]
What matters now
Gallantt manufactures steel products through its Gorakhpur and Kutch operations. It combines sponge iron, steel melting, rolling mills, pellets and captive power. This integration can lower dependence on outside suppliers, but only when production runs efficiently and investment costs are recovered through higher sales and cash flow. [S1][S2]
The Q2 numbers are not a straightforward growth story. Revenue of ₹1,145.89 crore was 13% higher than a year earlier, yet EBITDA of ₹110.52 crore was 18% lower and profit after tax of ₹60.51 crore was 31% lower. The combination points to cost and volume pressure rather than a simple demand-led earnings expansion. Management attributes the weakness partly to plant shutdowns and expects improvement as new capacity starts operating. That expectation remains to be demonstrated in subsequent results. [S1][S2]
A valuation premium would need evidence of three improvements together: higher output after shutdowns, sustainably better EBITDA per tonne, and cash generation sufficient to fund expansion without excessive leverage. The source pair does not provide a current share price, market capitalisation or consistent forward earnings forecast, so no entry price or target is assigned. The decision remains WATCH until the earnings recovery is visible rather than merely planned.
Investor decision points
The presentation reports ₹1,145.89 crore of Q2 revenue, ₹110.52 crore EBITDA and ₹60.51 crore profit after tax. EBITDA margin was 9.64%, while the profit margin was 5.28%. The presentation says revenue increased 13% year on year but EBITDA fell 18% and profit after tax fell 31%. That is a meaningful deterioration in profitability relative to sales. [S2]
Quarter-on-quarter revenue was essentially unchanged, up only 0.02%, while EBITDA declined 45.7% and profit after tax declined 51.1%. That divergence suggests that the cost of operating interruptions and inputs was substantial. It also means the latest quarterly margin should not be treated as a steady-state return on the company's expanding steel capacity. [S1][S2]
Management said stronger realisations helped offset the shutdown-related loss of production. The operating table supports the volume weakness: billets produced were 180 thousand tonnes versus 231 thousand tonnes in Q1 FY27 and 204 thousand tonnes in Q2 FY26. TMT bars produced were 162 thousand tonnes versus 196 thousand tonnes sequentially and 179 thousand tonnes a year earlier. Production and sales need to recover before the business can fully absorb its expanded fixed costs. [S1][S2]
The supplied presentation does not provide a complete statutory-versus-adjusted EBITDA reconciliation in the excerpts supporting this briefing. EBITDA and EBITDA per tonne are therefore presented as issuer-defined operating measures; profit after tax is separately identified. No unsupported adjustment is made to create a higher normalised profit number.
| Volume measure | Q2 FY26 | Q1 FY27 | Q2 FY27 | Unit |
|---|---|---|---|---|
| Pellet production | 185 | 112 | 228 | Thousand tonnes |
| Sponge iron production | 216 | 236 | 204 | Thousand tonnes |
| Billet production | 204 | 231 | 180 | Thousand tonnes |
| TMT bar production | 179 | 196 | 162 | Thousand tonnes |
| TMT bar sales | 176 | 192 | 164 | Thousand tonnes |
The mix matters. Pellet production expanded strongly even while downstream steel production fell. That is consistent with different operating constraints across the production chain and warns against interpreting one product's growth as evidence that the entire plant network was operating at full strength. [S2]
Gallantt's integrated model covers iron inputs, sponge iron, billets and finished TMT bars. These activities have different costs and prices. Billets are intermediate steel products, while TMT bars are finished reinforcement steel used in construction. Higher captive input availability may improve margins, but the economic benefit depends on the volume of finished steel sold and the prices realised. [S1][S2]
TMT bar sales were 164 thousand tonnes in Q2 FY27, down from 176 thousand tonnes in Q2 FY26 and 192 thousand tonnes in Q1 FY27. Sponge iron sales, by contrast, increased to 46 thousand tonnes from 34 thousand tonnes a year earlier, while billet sales were 20 thousand tonnes versus 23 thousand tonnes. The company's production chain therefore experienced a changing mix of internal use and external sales. That can influence revenue per tonne without representing a uniform improvement in demand. [S2]
The company describes a dealer and distributor network accounting for about 80% of sales, with a stated average debtor collection period of about 15 days. A short collection cycle can protect working capital, but it should be assessed against inventory accumulation and supplier payments during the expansion. The investor presentation also reports captive power supplying 89% of the two plants' requirements. That reduces reliance on purchased electricity but does not eliminate coal, maintenance or generation costs. [S2]
Product economics to monitor
Management said the quarter was affected by planned shutdowns and input-cost pressure, and argued that these disruptions were temporary. The company expects capacity coming on stream in Q3 to support a recovery. That is a useful operational milestone, but investors should check actual production volumes rather than assume the benefit will appear immediately in revenue or profit. [S1]
Gallantt has been awarded a coal block in Singrauli, according to the call, and has iron ore mining interests in Uttar Pradesh and Rajasthan. Management expects these assets to improve supply security and the cost structure over time. However, a mining award is not the same as commercial production. Mine development, approvals, logistics and actual delivered ore or coal costs determine whether the planned integration adds value. [S1]
The company also commissioned 18 MW of solar power in July 2026. Management discussed wind, solar, Gujarat debottlenecking and captive mines as margin-improvement levers. It indicated these projects could eventually add about ₹2,000 per tonne to EBITDA once operational. That is a management expectation about future benefits, not a realised Q2 profit improvement. [S1][S2]
The execution test is concrete: higher tonnes of billets and TMT bars, lower unit costs and evidence that new captive inputs are being used economically. Investors should compare promised capacity additions with commissioning dates and subsequent utilisation. The difference between a completed project and a profitable project can be substantial in a cyclical steel market.
The presentation reports net debt of ₹190.58 crore and a net-debt-to-EBITDA ratio of 0.64 times. The debt number is relatively modest beside the announced ₹3,000 crore capital programme, but that comparison is not a forecast of future leverage. Only ₹652.54 crore of the programme had been incurred by Q2 FY27, leaving a large amount of planned spending still to be executed. [S2]
That distinction is central to the investment decision. New steel and energy assets may improve costs, but they consume cash before they contribute a full period of earnings. The investor should therefore monitor operating cash flow, capital spending, working-capital needs and debt together, especially if steel prices soften while construction spending continues. [S1][S2]
The company's integrated strategy includes captive coal and iron ore, energy investments and debottlenecking. These may improve raw-material availability and reduce purchased-energy dependence, but the actual payback depends on delivered savings, volumes and project timing. The two cited documents do not establish a reliable project-by-project payback schedule, so the analysis uses milestones and cash evidence instead of a numerical payback promise.
Capital discipline indicators
Bull case: The planned shutdowns finish, new steel capacity starts on schedule and TMT bar volumes recover from 164 thousand tonnes. Captive power and future mining integration lower input costs, helping EBITDA per tonne improve from the Q2 reference of ₹6,149. Cash generation supports expansion while net debt remains manageable. This outcome needs a sequence of higher output, better margins and real cash conversion. [S1][S2]
Base case: Steel output recovers gradually, but the company continues to face cyclical input costs and mixed demand. Capital expenditure rises as projects advance, and new assets initially run below optimal utilisation. Profit improves unevenly rather than matching capacity growth immediately. This would keep the investment case dependent on execution rather than headline revenue growth.
Bear case: Shutdown effects last longer, steel realisations weaken, captive input projects are delayed or cost more than planned, and remaining capital spending increases borrowing requirements. The combination of lower EBITDA per tonne and rising debt would pressure returns even if installed capacity expands. This scenario becomes more concerning if TMT sales fail to recover while inventories or receivables rise.
What would change the view
Current stance: WATCH. Gallantt has a credible plan to expand capacity and integrate key inputs, but Q2 FY27 showed why execution matters. Revenue rose while margins and profit fell. The investment case will strengthen only when the new operating assets deliver higher finished-steel volumes, better unit profitability and enough cash to finance expansion. [S1][S2]
| Next-quarter indicator | Q2 FY27 reference | What a change would mean |
|---|---|---|
| Revenue | ₹1,145.89 crore | Compare with tonnes and selling prices |
| EBITDA margin | 9.64% | Test whether shutdown pressure is reversing |
| Profit after tax | ₹60.51 crore | Check earnings recovery after costs |
| EBITDA per tonne | ₹6,149 | Measure operating cost competitiveness |
| Billet production | 180 thousand tonnes | Test steel melting utilisation |
| TMT bar sales | 164 thousand tonnes | Test finished-product demand and dispatch |
| Pellet production | 228 thousand tonnes | Track upstream integration |
| Net debt | ₹190.58 crore | Watch funding pressure during capex |
| Capital spending incurred | ₹652.54 crore cumulative | Compare milestones with additional spending |
| Captive power share | 89% | Check energy reliability and actual savings |
The most useful follow-up questions are whether the shutdown-related volume losses have reversed, how much of the announced expansion is commercially producing steel, and whether lower energy and raw-material costs are reaching EBITDA per tonne. Ask management to distinguish operating improvements already achieved from benefits expected after mines and other projects become operational. [S1][S2]
Specific reporting boundaries: The ₹47,200-per-tonne average realisation shown in the presentation relates to FY26 and is not treated as a Q2 FY27 price. The net-debt/EBITDA multiple is the company's disclosed measure; its denominator should be reconciled before comparing it with quarterly EBITDA. The cited presentation and transcript do not provide a full project-by-project cash payback schedule or an independently reconciled statutory-versus-adjusted EBITDA bridge.
Unless otherwise specified, monetary amounts are in Indian rupees crore, production and sales in thousand tonnes, and comparisons refer to the issuer's stated period and reporting basis.
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
https://www.bseindia.com/xml-data/corpfiling/AttachHis/341299f9-6352-444b-9496-014aa79c9430.pdf
This is dated research, not a live market quote. Scenarios and historical performance are not guarantees.